Orbit B-hyve Gen 2 Wi‑Fi Hub USB Bridge for Bluetooth Devices — Remote App Control & Weather‑Aware Scheduling

The Orbit B-hyve Gen 2 Wi‑Fi Hub (21027) is a compact USB Wi‑Fi bridge that connects your Gen 2 B-hyve Bluetooth devices to the internet so you can monitor and control your smart watering system from anywhere.

The Gen 2 hub is built to extend smart features to Orbit's second-generation B-hyve controllers, timers, and sensors, turning local Bluetooth devices into full Wi‑Fi‑enabled components of a centralized water-management system. It pairs with compatible B-hyve models to provide remote access, weather-aware scheduling, and instant alerts. Designed for easy setup and low-profile installation, the hub is a single-point bridge that simplifies managing multiple B-hyve devices across your property.

How does the Gen 2 Wi‑Fi Hub enable remote control?

Once the hub is plugged in and connected to your home Wi‑Fi, it relays commands between the B-hyve app and your on-site devices. That means you can start, stop, or adjust irrigation and receive sensor updates from anywhere with an internet connection.

• Connects Bluetooth Gen 2 B-hyve devices to your Wi‑Fi network
• Access and control devices via the B-hyve mobile app remotely
• Receive push notifications for alerts like leaks or program changes

What range and device capacity should I expect?

The hub supports communication with B-hyve Gen 2 devices within an approximate 150‑foot radius, making it suitable for most residential yards and medium properties. A single hub can manage multiple devices, so you typically don’t need one per device unless you have a very large or obstructed area.

• Typical Bluetooth coverage up to 150 ft in open areas
• One hub can control multiple compatible B-hyve devices
• Recommended placement: central, elevated, and indoors near Wi‑Fi router for best performance

Which B-hyve products are compatible with this Wi‑Fi Hub?

The Gen 2 hub is specifically tuned for Orbit’s second-generation B-hyve lineup. It works with a variety of smart controllers, hose timers, and leak sensors so you can add Wi‑Fi features to existing Bluetooth units without replacing them.

• Compatible models include: 24511, 24516, 24632, 24537, 24634
• Also supports: 54539, 71000, 71003, 71005
• Works with select flood sensor and controller variants: 90204, 90205, 90204Z, 90205Z, 21204, 21205

How simple is installation and daily use?

Installation is straightforward: plug the Gen 2 Wi‑Fi Hub into power using the included wall adapter, connect it to your home network, and follow the pairing steps in the B-hyve app. Everyday use is handled through the app where you can check status, change schedules, and enable weather-based adjustments without returning to the device.

• Includes wall adapter for quick plug-and-play setup
• Pairing guided through the B-hyve app for step-by-step configuration
• Firmware updates and new features delivered over the network

Who is this for? The Orbit B-hyve Gen 2 Wi‑Fi Hub is ideal for homeowners and property managers who already own or plan to buy Gen 2 B-hyve Bluetooth devices and want full remote access and notification features without replacing existing units. It suits users who value centralized control of multiple controllers, hose timers, or leak sensors across a typical residential property and who prefer a low-effort, app-driven setup with weather-aware watering adjustments.