VIVCASE Replacement Intelligent Voice Backlit Remote for vSeeBox V5 Pro/V3 Plus — Bluetooth, IR Learning, Long-Range

The VIVCASE Replacement Intelligent Voice Backlit Remote is a multi-mode, long-range remote designed to control vSeeBox models including V3 Pro, V3 Plus and V5 Pro with optional voice and Bluetooth pairing features.

Replace a lost or worn controller with a drop-in compatible remote that supports infrared learning, Bluetooth pairing, two selectable working modes, and backlit keys for low-light operation. Built for vSeeBox set-top boxes across several generations, this remote offers fast button response and a long transmission range so you can control media, adjust volume, and program TV commands without hunting for your original handset.

How do I program my TV buttons using this VIVCASE remote?

Programming TV keys uses the remote’s Learning Mode so it can mimic your TV’s original remote. Enter Learning Mode, press the key you want to program, then point your TV remote at the VIVCASE unit to transfer the signal. The remote confirms successful learning with LED feedback.

• Press and hold the TV POWER key for 5 seconds until the LED becomes solid to enter Learning Mode.
• Press the target key on the VIVCASE remote; the LED will blink slowly awaiting input.
• Hold the original TV remote under 3 cm from the VIVCASE front and press the desired button; LED flashes three times on success.
• Repeat for additional keys and exit by pressing any other button; LED turns off.

Which vSeeBox models and features are supported by this replacement remote?

This remote is compatible with a wide set of vSeeBox models but feature availability depends on the box version. Voice commands are available on models that originally shipped with voice support; some older models work without voice.

• Compatible with vSeeBox V5 Pro, V3 Plus, V3 Pro, V2 Pro, V1 Pro, V1 Max, Elite and Max boxes.
• Voice command works on models that originally support it; V1 Max, V1 Pro, V2 Pro do not include voice functionality.
• Confirm your box model before purchasing to ensure full feature coverage.

How do I pair this remote to vSeeBox using Bluetooth and what should I expect?

Pairing uses a simple Bluetooth discovery step activated by a button combination. Once paired, the remote sends commands over Bluetooth for lower-latency control and integrates with system settings like any original remote would.

• Press and hold OK + VOL- for 5 seconds until the indicator flashes to enable Bluetooth pairing mode.
• Open System Settings → Bluetooth → Pair New Device on your vSeeBox and select the "vseebox remote control" entry.
• If the remote isn't found, toggle Bluetooth by repeating the OK + VOL- hold to re-enable discovery.

What performance and operational details should I know about this VIVCASE remote?

The remote offers two working modes, extensive button durability, and a long infrared range for reliable control across a typical living room. Mode switching lets you adapt the controller to older or newer vSeeBox firmware behaviors.

• Two working modes: V3 mode for V3 Pro devices and V2 mode for V1 Pro/V2 Pro/Max/Elite; switch modes by holding the number key 5 for 10+ seconds.
• Infrared transmission extends up to 10 meters (about 32 feet) with a fast response time under 0.2 seconds.
• Buttons are rated for over 100,000 presses and include backlighting for viewing in dim rooms.

Who is this for? The VIVCASE Replacement Intelligent Voice Backlit Remote is suited for vSeeBox owners who need a reliable replacement remote with programmable TV keys, Bluetooth pairing, and multi-mode compatibility. It’s ideal for households that want backlit keys for nighttime viewing, a long-range infrared signal for flexible placement, and the ability to pair with multiple vSeeBox generations. Verify your box model to ensure voice support and select the correct working mode to match your device.