SprayMax 2K High Gloss Clearcoat Aerosol USC — two-component aerosol clearcoat, durable fast-drying finish

SprayMax USC 2K High Gloss Clearcoat Aerosol is a two-component, spray-gun–style aerosol clearcoat that activates in-can and delivers a durable, high-gloss finish with excellent weather and chemical resistance.

This ready-to-use 2K aerosol clearcoat from SprayMax combines the convenience of a spray can with the protection and appearance of professional two-component systems. Simply activate the can, shake, and spray to get smooth flow, fast drying, and a long-lasting high gloss over cured basecoats. The unique valve and nozzle system are engineered to produce a spray pattern comparable to a conventional spray gun, making it a practical choice for small repairs, touch-ups, and panel-sized refinishing.

How does activation and application work?

Activation is done inside the can: press the internal actuator until the hardener drops into the base portion, then shake thoroughly. Apply the clearcoat in multiple thin passes from the recommended distance, allowing flash time between coats for an even finish and to prevent runs.

• Activate in-can by pressing the internal tab to mix components.
• Shake for the time specified on the can to fully emulsify hardener.
• Spray several light coats 20–30 cm from the surface; allow flash time between passes.
• Use in a well-ventilated area and follow safety directions on the label.

What performance should I expect on cured basecoats?

When applied over properly prepared and cured basecoats, the SprayMax 2K clear develops high gloss, good flow and leveling, and resistance to weathering and chemicals typical for automotive clears. It is formulated for small-area work but yields a hard, paint-like surface once fully cured.

• Designed for use over all basecoats, including single-stage and base/clear systems.
• Provides maximum resistance to abrasion and scratching compared to conventional aerosols.
• Manufacture date and two-year shelf guidance appear on the can—check before use.

Which surfaces and projects are suitable for this product?

This aerosol clearcoat is ideal for spot repairs, panel replacements, and small refinishing jobs where spray-gun access is limited. It works well on automotive panels, metal parts, and other surfaces that have been primed and base-coated according to standard finishing practice.

• Best for small to medium panel work and touch-ups—avoids full-spray booth setup.
• Compatible with conventional and modern solvent-borne basecoats when those basecoats are fully cured.
• Not intended for large-scale factory refinishing where bulk two-component systems are preferred.

Who is this for? Professional refinishers, body shops, and experienced DIYers who need the protection and appearance of a 2K clear without the equipment required for conventional spray-gun mixing will find SprayMax USC 2K practical and time-saving. It’s especially useful for on-the-spot repairs, fleet touch-ups, or mobile refinishing where portability and fast setup matter. Be sure to follow label instructions, observe recommended drying times, and use appropriate personal protective equipment. Note: this product contains substances subject to regional hazard warnings—consult the can label for safety and disposal information.