PC Products PC-Clear Epoxy Adhesive 1oz Double Syringe, 12-Pack Clear — Fast Cure, Invisible Bond

PC-Clear is a completely transparent two-part epoxy adhesive designed to form a tough, flexible, and long-lasting clear bond for repairs where invisibility matters.

PC Products PC-Clear delivers a clear-cure epoxy in a convenient 1oz double-syringe format, packaged as a 12-count bulk set for workshops, hobbyists, and repair pros. The resin and hardener mix initially milky then cure crystal clear, making it ideal when you need a nearly invisible join on substrates such as wood, metal, glass, ceramic, concrete, and fabric. It resists common household chemicals and water, offers short working times for quick fixes, and cures to a durable, slightly flexible finish.

How quickly does PC-Clear work and cure?

PC-Clear gives you a practical working window and fast functional strength. You get roughly four minutes of workable time after mixing, functional handling in about one hour, and a full cure at 24 hours under typical conditions.

• Work time: ~4 minutes
• Functional cure: ~1 hour
• Full cure: ~24 hours
• Cure speed influenced by temperature and mixed volume

What materials will PC-Clear bond to, and what won’t it stick to?

PC-Clear bonds strongly to many common materials like wood, metal, glass, ceramics, concrete, and fabric. However, it does not adhere to certain low-surface-energy plastics and slick release surfaces—always test if unsure.

• Good adhesion: wood, metal, glass, ceramic, concrete, fabric
• Poor adhesion: wax paper, Teflon, polyethylene, some other plastics
• Recommendation: test small area on unknown plastics

Is PC-Clear durable and resistant to chemicals and temperature?

PC-Clear cures to a durable, flexible bond with notable resistance to mild acids, alkalis, detergents, gasoline, fuel oil, salt, and fresh water. It tolerates a broad service range but avoid prolonged exposure to higher temperatures beyond its rated limits.

• Chemical resistance: mild acids, caustics, detergents, fuels, salt water
• Service temperature: continuous from -20°F to +200°F
• Finish: clear, flexible, and impact-resistant once fully cured

Are there safety or application tips I should follow?

PC-Clear generates heat as it cures; larger mixed volumes produce more exotherm, so mix only the amount you need and use caution on heat-sensitive parts. Apply on a flat surface or with a static mixer, wear gloves, and avoid contact with skin or eyes.

• Mix on a flat surface or use a static mixer for even ratio
• Use small batches to limit heat generation during cure
• Wear gloves and eye protection; avoid skin contact

Who is this for? PC-Clear is best for DIY enthusiasts, craft makers, restoration specialists, and maintenance professionals who need a clear, reliable bond that blends into the repaired material. It’s useful in jewelry and glass repairs, visible wood or ceramic fixes, marine small-parts touch-ups, and any application where minimizing visible adhesive is important. For unknown plastics, test compatibility before committing to a large repair.