MIKKUPPA M12x1.5 Lug Nuts 20PCS Gold — 19mm Hex, 60° Conical Closed-End, Corrosion-Resistant

MIKKUPPA M12x1.5 Gold Lug Nuts are a 20-piece set of closed-end, conical-seat wheel nuts engineered for corrosion resistance, secure fit, and a polished gold finish.

These lug nuts combine cold-forged steel, heat treatment and an integrated powder-coat finish to deliver durable wheel fasteners for many popular vehicles and aftermarket wheels. With a 19mm (3/4") hex, 60° conical seat and M12x1.5 thread pitch, this set is intended for drivers who want reliable fastening plus a striking gold visual upgrade. The closed-end, one-piece design reduces exposure to contaminants while the salt-spray-tested coating helps maintain appearance and resist corrosion over time.

Will these lug nuts fit my car and wheels?

Compatibility centers on thread pitch, seat type and wheel opening. These M12x1.5 nuts use a 60° conical (bulge) seat and a standard 19mm hex; they are compatible with many aftermarket wheels and vehicle models that specify that combination.

• M12 x 1.5 thread pitch — confirm with your vehicle or wheel spec.
• 60° conical seat — fits wheels that accept bulge/conical-seat nuts.
• 19mm (3/4") hex — requires a 19mm socket or wrench for installation.
• Fits many Ford (Escape, Focus, Fusion), Honda (Accord, CR-V), Acura TSX, Chevy Trailblazer models listed in product notes.

How durable and corrosion-resistant are these lug nuts?

The MIKKUPPA set uses cold-forged, heat-treated steel with a thick, infrared-bonded finish that passed a 72-hour salt spray test. That process bonds paint to metal to reduce chipping and oxidation compared with conventional coatings.

• Cold-forged, heat-treated construction for high tensile strength and wear resistance.
• Infrared-curing paint bonded to metal to minimize flaking and peeling.
• 72-hour salt spray resistance for improved corrosion protection in harsh conditions.
• Closed-end design blocks road grime and moisture from lug threads.

What are the physical dimensions and installation specifics?

Understanding the nuts' measurements and shape ensures proper installation and clearance. These nuts are 35.05mm (1.38") long with a 22mm (0.87") body width and accept a 19mm hex socket.

• Thread: M12 x 1.5 — matches wheels/vehicles with the same pitch.
• Length: 35.05 mm (1.38") — check hub and lug access depth before purchase.
• Head: 19mm (3/4") hex — use a proper torque wrench and socket for tightening.
• Seat: 60° conical — requires matching conical-seated wheel holes.

How is the one-piece design better than two-piece lug nuts?

One-piece lug nuts remove the potential failure mode of separable components and offer a simpler, sturdier fastener. The integrated body and finish increase part integrity and lower the chance of loosening or stripping under normal use.

• Single-piece construction reduces moving parts and potential points of failure.
• Thicker coating applied to the whole part for consistent protection.
• Engineered to resist rusting and thread stripping with routine torque use.
• Closed end prevents contaminants from reaching exposed wheel studs.

Who is this for? These MIKKUPPA gold lug nuts are aimed at car owners and wheel enthusiasts who need M12x1.5, 60° conical-seat fasteners and want a durable, attractive gold finish. They suit people upgrading aftermarket wheels or replacing worn nuts on compatible Ford, Honda, Acura and Chevy models, plus many other vehicles that accept M12x1.5 thread and a 60° seat. If you require OEM-specific locking nuts or a different thread pitch/seat type, verify fitment before ordering. MIKKUPPA backs the product with 12 months of brand support to assist with fitment questions and post-purchase concerns.