D-Line Cord Cover Kit — 157in Self-Adhesive Paintable Cable Raceway, 10×15.7" White with 19 Accessories, 1.18"×0.59"

This kit brings together ten 15.7-inch white raceway lengths and 19 fittings so you can conceal TV, gaming, charger, and speaker cables without cutting into walls. Each slotted length is pre-fitted with adhesive backing for peel-and-stick mounting, and the plastic surface accepts paint after light sanding, letting you match the trim or wall color for an almost invisible finish.

How many and what size cables will the D-Line 157in kit hold?

The raceway measures 1.18 inches wide by 0.59 inches high and fits several standard cords at once. It accommodates up to three cords roughly 0.18 inches (4.5 mm) in outer diameter each, depending on connector bulk.

• Interior channel: 1.18" x 0.59" (W x H)
• Typical fit: up to three slim power or signal cables
• Not recommended for very large, armored, or thick multi-conductor cables

How easy is installation and what tools do I need?

Installation is designed to be tool-minimal: each length has pre-applied adhesive tape so you can peel and stick. For a secure hold, clean and dry the mounting surface, press firmly along each length, and allow adhesive to set; a utility knife helps trim lengths for precise fits.

• Required: cleaning cloth, scissors or utility knife
• Optional: measuring tape, fine sandpaper and paint supplies
• Accessories included to join lengths and navigate corners without cutting

Can I paint the cord covers to match my wall or trim?

Yes — the plastic raceway can be painted to blend with surrounding surfaces. To get an even finish, sand lightly, remove dust, and apply two light coats of paint formulated for plastics or use a primer first if recommended by the paint maker.

• Prep: fine-grit sandpaper to dull glossy finish
• Apply: wipe dust, then two light paint coats for best coverage
• Tip: test a small piece first to confirm adhesion and color match

What accessories come with the kit and where are they used?

The kit includes 19 accessories designed to join straight sections, route around corners, and transition near sockets or baseboards. These fittings let you shape runs without needing to cut lengths or leave gaps around turns.

• Connectors for end-to-end joins of 15.7" lengths
• Corner and angle pieces for inside/outside turns
• Socket and entry fittings for neater wall-plate transitions

Who is this for? Homeowners, renters, and small-business spaces that need an economical, non-invasive way to hide cords will benefit from the D-Line 157in Cord Cover Kit. It's especially useful for TV and entertainment areas, home office desks, and anywhere you want tidy cable runs without rewiring or drywall cuts. If you need a paintable, peel-and-stick solution with enough parts to tackle corners and multiple runs, this kit gives a flexible, low-effort way to create a finished look.