Ankita Tile Repair Kit — Color Match Epoxy Putty for Ceramic & Porcelain Tiles, 7 Pigments, Water-Resistant Durable Finish

Ankita Tile Repair Kit (Color Match) is a two-part epoxy putty designed to fill chips, cracks and edge damage on ceramic and porcelain tiles with tintable pigments for a closer color match.

Small surface damage on floors and walls often looks worse than it is, and replacing whole tiles can be costly and time-consuming. This kit provides a DIY-friendly option: a hard-curing, non-shrinking epoxy putty you mix, tint, apply, shape and sand so repaired areas blend with surrounding tile. It’s intended for ceramic and porcelain tiles in kitchens, bathrooms, showers and other indoor areas where a water-resistant, durable fix is needed after full cure.

How does the color-matching system help me blend repairs?

The kit includes seven pigments you add to the white base putty to approximate common tile shades like white, gray, beige and almond. By mixing small amounts of pigments into the epoxy you can adjust hue and value until the repaired area harmonizes with nearby tiles.

• Seven tinting pigments for incremental color control
• Start with small pigment doses and build color gradually
• Works on light to medium tile tones; test on scrap before final application

Will the repaired surface stand up to foot traffic and moisture?

Yes — once fully cured the epoxy putty hardens to a durable, non-shrinking finish that sands smooth and resists everyday wear. The material is formulated to remain level under normal foot traffic and becomes water-resistant after the complete cure time, making it suitable for bathroom and kitchen floors as well as shower walls.

• Hard-cure epoxy resists abrasion and compression from foot traffic
• Non-shrink formula maintains flush repairs without sinking
• Water-resistant when fully cured — suitable for wet areas

What steps are involved in a typical DIY tile repair?

Repairs are straightforward: clean the damaged area, mix the two-part epoxy, tint to match, apply and shape, then sand smooth after curing. No specialized tools or tile replacement are required; most jobs use basic household items like a mixing stick, putty knife and sandpaper for finishing.

• Clean and dry the chip or crack; remove loose debris
• Mix resin and hardener according to instructions, then add pigments
• Fill, shape, let cure, then sand and blend for a smooth finish

How do I know when to use this kit instead of replacing a tile?

This kit is ideal for cosmetic and small structural damage: chips, pits, surface cracks and edge wear that don’t compromise tile adhesion or substrate stability. If a tile is loose, severely cracked through-and-through, or the substrate is damaged, replacement or professional repair may be necessary.

• Good for small chips, surface scratches, pits and minor edge damage
• Not recommended for tiles that are loose, hollow, or structurally failed
• Use as a cost-effective alternative to full tile replacement for cosmetic fixes

Who is this for: Homeowners, DIYers, property managers and maintenance technicians who want an affordable, straightforward way to fix small ceramic and porcelain tile damage without removing whole tiles. The kit suits anyone comfortable with basic mixing and light sanding who wants a durable, color-adjusted repair for floors, walls, showers and backsplashes.