Ankita Fiberglass Tub Repair Kit — Color-Matchable 2-Part Paste for Cracks & Chips, Waterproof Durable Finish

Ankita Fiberglass Tub Repair Kit is a two-part, color-matchable paste that fills and seals cracks, chips and scratches on fiberglass, acrylic and ceramic tubs and showers.

This repair kit gives homeowners a durable, waterproof fix for common surface damage without replacing the whole tub or surround. The fast-curing, non-drip formula bonds to fiberglass, acrylic and porcelain finishes and can be tinted to blend with new and aged white, off-white and cream shades. Designed for DIY use, it requires simple surface prep, mixing with included pigments, filling, smoothing and full cure before water exposure.

How does this kit make a tub crack or chip look less noticeable?

The kit includes a hard-curing two-part paste plus pigments so you can mix a matching shade and feather repairs into the surrounding finish. The cured material sands and polishes to a low-profile repair that reflects light similarly to the tub surface, reducing visibility of damage.

• Two-part acrylic-safe paste bonds strongly to fiberglass and acrylic
• Pigments for bright white, aged white, almond and cream matches
• Sands and polishes for a blended finish
• No separate primer or repainting required after proper curing

Will the repaired area hold up to water and normal bathroom use?

Yes — once fully cured the paste becomes a waterproof, durable surface that stands up to showering and light daily wear. The formula is made to stay in place during application so it won’t slump on vertical panels, surrounds or the edges of tubs.

• Waterproof cured finish suitable for shower pans and tub surrounds
• No-drip consistency for vertical and overhead repairs
• Resists peeling when applied to clean, dry surfaces
• Cure times vary; avoid water until manufacturer-recommended cure is reached

What surfaces and damage types can this kit repair?

The product is formulated for common bathroom surfaces and typical cosmetic damage. Use it on chips, small cracks, drilled holes, deep scratches and rust spots on fiberglass, acrylic, porcelain and ceramic tubs, showers and molded panels.

• Fiberglass and acrylic tubs and shower bases
• Porcelain and ceramic tile chips and edges
• Molded shelves, drain areas and shower surrounds
• Small to medium cosmetic damage; not for structural support

How simple is the application for a DIY repair?

Application is straightforward: clean the area, mix the two-part paste and pigment to match, apply and shape, then let it cure fully before sanding or polishing. No primer or additional tub paint is required when the repair is correctly prepared and cured.

• Clean and dry damaged area before starting
• Mix base and hardener, add pigment to match shade
• Fill, smooth with supplied tools, then allow recommended cure time
• Sanding and polishing improve blend; follow safety guidelines

Who this is for: homeowners, landlords and maintenance technicians who need a cost-effective, do-it-yourself way to restore tubs, shower pans and surrounds without full replacement. It suits anyone dealing with cosmetic chips, cracks or scratched finishes on fiberglass, acrylic, porcelain or ceramic fixtures who wants a near-match color repair and a waterproof, long-lasting finish.