{"product_id":"evolution-7-1-4-48-tooth-stainless-steel-cutting-saw-blade-20mm-arbor-low-heat-dry-cut","title":"EVOLUTION 7-1\/4\" 48-Tooth Stainless Steel Cutting Saw Blade — 20mm Arbor, Low-Heat Dry Cut","description":"\u003cp\u003e\u003cstrong\u003eThe EVOLUTION 185BLADESS 7-1\/4\" x 48-tooth blade is a stainless-steel–specific circular saw blade engineered for low-heat, low-burr dry cutting on low-RPM saws.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis blade is built for tradespeople and metalworkers who need a reliable toothed blade that slices stainless steel and other metals cleanly without generating excessive heat. Designed for use with Evolution saws and other low-RPM machines, the 185BLADESS combines carbide teeth, a narrow kerf, and a 20mm arbor for stable performance and reduced material waste. It is optimized for dry cutting, letting you avoid coolant while keeping cutting edges cooler and minimizing burrs.\u003c\/p\u003e\n\n\u003ch3\u003eWhat materials will this blade cut effectively?\u003c\/h3\u003e\n\u003cp\u003eThe 185BLADESS is tuned for stainless steel but performs well on a range of non-ferrous and thin-gauge ferrous metals. It cuts cold rolled and stainless sheet, tubing, angle iron, and other mild steel profiles when matched with the appropriate low-RPM saw and feed rate. Avoid high-speed circular saws that exceed the blade's maximum RPM.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStainless steel sheets and tubing — clean edge with few burrs\u003c\/li\u003e\n  \u003cli\u003eMild steel and thin-gauge ferrous metals — controlled, low-heat cuts\u003c\/li\u003e\n  \u003cli\u003eNon-ferrous metals such as aluminum and brass — smooth finish\u003c\/li\u003e\n  \u003cli\u003eNot intended for masonry, wood, or high-RPM cutting applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow does the blade manage heat and burrs during cutting?\u003c\/h3\u003e\n\u003cp\u003eThe blade uses a dry-cutting approach combined with carbide teeth geometry to minimize heat buildup and reduce burr formation along the kerf. At lower rotational speeds, the tooth design shears material more than melts it, so you get cooler cuts and less post-cut cleanup. Proper feed rate and using saws that respect the 3900 RPM limit are important to maintain those benefits.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDry cut technology reduces thermal damage to workpieces\u003c\/li\u003e\n  \u003cli\u003eCarbide teeth preserve cutting edge life and reduce burrs\u003c\/li\u003e\n  \u003cli\u003e.070-inch kerf lowers material loss and power draw\u003c\/li\u003e\n  \u003cli\u003eMax RPM 3900 — use only with compatible low-speed saws\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the blade’s key specifications and compatibility details?\u003c\/h3\u003e\n\u003cp\u003eThe blade measures 7-1\/4 inches in diameter and contains 48 carbide teeth arranged to balance speed and finish quality. Its .070-inch kerf reduces material waste and makes for easier handling, while the 20mm arbor size fits many Evolution saws and other low-speed metal cut saws with the correct adapter. Check your saw’s RPM rating before mounting to ensure safe operation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDiameter: 7-1\/4\" (185 mm)\u003c\/li\u003e\n  \u003cli\u003eTeeth: 48 carbide-tipped\u003c\/li\u003e\n  \u003cli\u003eKerf: .070 inch for reduced waste\u003c\/li\u003e\n  \u003cli\u003eArbor: 20 mm — confirm fit or use correct adapter\u003c\/li\u003e\n  \u003cli\u003eMaximum safe speed: 3900 RPM\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow should I use and maintain the blade for best life and performance?\u003c\/h3\u003e\n\u003cp\u003eUse steady, moderate feed pressure when cutting stainless steel and let the blade do the work—forcing the cut can overheat the edge and shorten blade life. Keep the blade clean of built-up swarf and inspect teeth regularly for wear or damage. Store the blade flat or hung to prevent warping and replace it when tooth damage increases burring or slows cutting dramatically.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaintain steady feed and avoid overloading the saw\u003c\/li\u003e\n  \u003cli\u003eInspect teeth and clean swarf after heavy use\u003c\/li\u003e\n  \u003cli\u003eStore protected to prevent chipping or warping\u003c\/li\u003e\n  \u003cli\u003eReplace when cut quality or speed degrades\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for? The EVOLUTION 185BLADESS blade is aimed at metal fabricators, plumbers, HVAC technicians, and serious DIYers who work with stainless and other metals and who use Evolution or other low-RPM saws. If you need clean, cool dry cuts with minimal burrs on metal profiles and sheet, and your saw operates within the 3900 RPM limit, this blade offers a robust balance of cutting quality, kerf efficiency, and carbide durability.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will this blade fit my saw?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: It fits saws with a 20mm arbor or those using an appropriate adapter; ensure your saw's max RPM is 3900 or lower.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use coolant or oil with this blade?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The blade is designed for dry cutting; using coolant may change cutting behavior and isn't required for low-heat performance.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"EVOLUTION","offers":[{"title":"Default Title","offer_id":52907517641016,"sku":"B004Q09EFC","price":126.73,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1012\/6799\/6984\/files\/evolution-185bladess-front-view.jpg?v=1788525632","url":"https:\/\/kelorix.ca\/products\/evolution-7-1-4-48-tooth-stainless-steel-cutting-saw-blade-20mm-arbor-low-heat-dry-cut","provider":"Kelorix Canada | Shop Home, Electronics, Beauty, Toys \u0026 More","version":"1.0","type":"link"}